| |
|
Microbiological Safety Cabinet
 MSC Class II Type A2
Fully EN12469 certified by Tüv
Hamburg and LNE Paris.
Last generation Microprocessor
control with interactive functions
Large screen monitor, with
permanent display of critical
functions and operational /
emergency messages.
Multilevel alarms with redundancy
functions
Continuous measurement of
volumetric airflows (total and
exhausted)
Air and aerosol-tight sliding sash,
electrically operated by finger touch
Automatic Sterilisation Cycle (ASC),
reliable, safe and reproducible.
 Article No.: 14296 (Model 1.2) & 14304
(Model 1.8)
|
| |
S@feflow TM Cabinets are supplied in three different sizes (1.2mt and 1.8mt).
These highly sophisticated Microbiological Safety Cabinets Class II Type A2, provide the highest safety for the operator and the environment for the manipulation of Risk Groups 1 to 3 of pathogens (WHO Classification of Infective Microorganisms by Risk Group, 2004)
The internal design, the air flow aerodynamics and monitoring, the built-in safety devices and the comprehensive range of unique options, guarantees the highest performances at the most stringent safety levels, higher than those specified by EN12469 standard and have been certified by all the most prestigious European certification bodies for Safety Cabinets (Germany, UK and France).
Certified intrinsic biological safety, combined with highly sophisticated interactive features and options, gives the end user, the environment and the product an ultimate microbiological safety that only experienced European design with over 35 years of know how and accurate quality manufacturing, can provide.
Fully EN12469 certified (by Tuev
Hamburg and LNE Paris)
Sloped front for highest operational
comfort.
Air- and aerosol-tight electrical sliding
sash with smart functions. User friendly
swing-out feature for effective cleaning
and sanitation of the inner glass surface.
Very silent and quite operation <54dB
(A) due to special soft plenum design and
highly vibration-free suspensions of the
fan(s).
Utilities plug-in from the top. Standard
gas tap, power point and vacuum tap are
connectable from the top of the cabinet.
Consequently the overall width footprint
of the cabinet is considerably reduced.
Recessed exhaust filter configuration to
maximize distance from HEPA filter
surface to laboratory ceiling, even with
dual exhaust filter installed
Data Logger Kit
UPS Emergency Power Supply
Sloped front design for the highest
operational comfort. Sloped back side of
the working chamber for the best down
flow distribution (cabinet carcass
EN12298 tested and certified for air
tightness)
Stainless Steel 304 internal surfaces with
2B finishing (including spillage tray).
Perforated work surface (3 sections) and
special designed front grill. Solid work
surface available.
Stainless steel 304 spillage sump |
|
| |
|
Electrically operated sliding multilayer
safety glass window; swing out features
for cleaning.
Utilities inlets from the top of the
cabinet.
Recessed exhaust Hepa filter.
H14 class High Efficiency Particulate Air
filters guaranteed with 99.999%
efficiency on 0.3 micron particles (most
penetrating particle diameter) (EN1822-
1 and EN 13091:1999 tested and
certified)
Exhaust and Main Filters are equipped
with a micromesh membrane located
downstream which acts as airspeed
equalizer expansion plenum, as well as a
clear indicator of filter damages.
Filter change and maintenance from the
front of the cabinet.
Exhaust transitions easily installable.
Three PIN code levels (Operator,
Supervisor and Calibration)
Programmable UV light cycle.
Digital HEPA filter life span indicator
Digital UV lamp life span indicator
Automatic re-set of original working
conditions in case of power failure. |
|
| |
|
Self calibration cycle performed at start -
up.
High speed rinse and set up cycle
performed, before reaching the SAFE
operating mode.
Soft touch control with keys for standard
service utilities.
Interconnected UV and fluorescent
lights.
Exhaust and recirculating flow rates
ensure 25 air changes/min in the working
area (30% 70% split)
Front barrier air speed ≥ 0.5mt/sec
Aperture protection Factor (Apf) ≥ 2x 10
exp 5 (KI-discus test)
Cleanability Index CC grade.(EN 12296
tested and certified)
Light intensity on work surface
> 900 lux.
Noise level ≤ 54dB(A) 1.2 mt Model
(ISO 11201, ISO 4871 and ISO EN 3744
tested and certified)
Work surface displacement (vibration)
<0.005mm RMS between 20Hz and
20,000Hz (ISO 5349 tested and certified)
230V, 50Hz
Max power (for each power point)
3Amps.
CE certification according to Machinery
Directive 89/392/EEC, 91/368/EEC,
93/44/EEC 93/68/EEC. |
|
|
|
