| |
|
Microbiological Safety Cabinet
 Fully EN12469 certified by Tüv
Hamburg
State of the art microprocessor
control system
Large digital display, high resolution
Air and aerosol-tight sliding sash,
electrically operated by finger touch
Alarms for low air flow and wrong
front window position
Sloped front and back wall for the
most comfortable access
Front access for filter maintenance
and service
C-shaped support stand for the
easiest one man installation
procedure
Easy retrofit option kits
 Article No.: 14297 (Model 1.2) & 14303
(Model 1.5)
|
| |
Safemate Cabinets are supplied in three different sizes (1.2 mt and 1.5 mt). These last generation Microbiological Safety Cabinets Class II typ A2, have been certified according to the most stringent safety standards (EN 12469-2000).
The internal design, the air flow aerodynamics and monitoring, the built-in safety devices and the very accurate manufacturing, guarantees the highest performances at the most stringent safety levels, as specified by EN 12496 standard and have been certified by the most prestigious European certification bodies for Safety Cabinets. Certified intrinsic biological safety, combined with impressively competitive prices, give the end user a state of the art cabinet accessible to every budget, that only experienced European design and accurate quality manufacturing can provide.
Microprocessor controlled motor blower,
with volumetric sensor for exhausted air
flow monitoring
State of the art Microprocessor control
system offering:
Large screen monitor
Automatic control of preset airflow
volumes
Sliding sash window with smart control
Permanent monitoring of HEPA filters
life span
Alarms. Multilevel alarms, with
redundancy functions
Permanent display of working
conditions
Highest air flow stability both in case of
transitional disturbances or to
progressive filter clogging
Semi-automatic fumigation cycle
(EN12297 tested and certified)
Continuous monitoring of front barrier
air flow for the highest operator safety
Low barrier alarm
Power failure alarm
Volt-free contact for remote monitoring
of exhaust fan.
Automatic reset of initial conditions in
case of power failure
C-shaped support stand for the easiest
one man installation procedure |
|
| |
|
Sloped front design for the highest
operational comfort. Sloped back side of
the working chamber for the best down
flow distribution (cabinet carcass
EN12298 tested and certified for air
tightness)
Utilities inlets from the top of the
cabinet.
Stainless Steel internal surfaces with 2B
finishing (including spillage tray). Solid
work surface (3 sections) and special
designed front grill.
Electrically operated sliding multilayer
safety glass window
(max opening at 120°)
Comfortable 200mm front opening
Easy to install retrofit options through
lateral sides.
Exposed exhaust Hepa filter for easy
visual integrity check.
H14 class High Efficiency Particulate Air
filters with 99.999% efficiency
on .3micron particles (most penetrating
particle diameter) (EN1822-1 and EN
13091:1999 tested and certified)
Both exhaust and Main Filters are
equipped with a micromesh membrane
located downstream which acts as
airspeed equalizer expansion plenum, as
well as a clear indicator of filter
damages.
Filter change and maintenance from the
front of the cabinet.
Exhaust transitions easily installable.
Key operated. The key can be removed
when the unit is in SAFE mode, in order
to avoid unwanted operation. In case of
power failure, the cabinet is re-set to
original working conditions. |
|
| |
|
Self calibration cycle performed when
cabinet is switched on.
High speed rinse and set up cycle
performed, before reaching the SAFE
operating mode.
Visual display of SAFE conditions. Pre-
warning before actual alarm conditions
are reached (visual and acoustic alarms)
Soft touch control with keys for standard
service utilities. Interconnected UV and
fluorescent lights.
Exhaust and recirculating flow rates
ensure 25 air changes/min in the working
area (30% 70% split)
Front barrier air speed ≥ 0.5mt/sec
Aperture protection Factor (Apf) ≥ 1.5 x
10 exp 5
Cleanability Index CC grade.(EN 12296
tested and certified)
Light intensity on work surface
> 900 lux.
Noise level ≤ 56dB(A) 1.2 mt Model
(ISO 11201, ISO 4871 and ISO EN 3744
tested and certified)
Work surface displacement (vibration)
<0.005mm RMS between 20Hz and
20,000Hz (ISO 5349 tested and certified)
230V, 50Hz
Max power (for each power point)
3Amps.
Microprocessor equipped with analogical
watch dog.
CE certification according to Machinery
Directive 89/392/EEC, 91/368/EEC,
93/44/EEC 93/68/EEC. |
|
|
|
