|
Mikromanipulator - Technical details |
|
|
| |
Technical Data |
|
|
| |
Injection / Holding by trackball: |
Pressure generation
• Plunger / cylinder system
• Oil filled (mineral oil embryo tested)
• Maintenance free
Volume per rotation
• 7.85 µl
Adjustable total volume
• 314.16 µl
Minimally adjustable volume
• < 15 nl |
|
| |
Injection / Holding manual: |
Pressure generation
• Plunger / cylinder system
• Oil filled (mineral oil embryo tested)
• Maintenance free
Volume per rotation rough / fine
• 7.85 µl / 0.785 µl
Adjustable total volume
• 314.16 µl
Minimally adjustable volume
• Depends on operator’s precision |
|
| |
Electrical operation units: |
Electrical operation units:
Control of x, y, z axis
• Trackball with proportional mode
• Drive: hybrid step motor
• Resolution: 10 nm per micro step
• Max. operation distance: 25 mm
• Max. speed: 8 mm/s
• Speed adjustable for 32 levels
• Speed mode high / low selectable
Dimensions / weight
• Per axis x, y, z: 15 x 5.5 x 3 cm
• Control base: 41 x 48.5 x 13.5 cm / 8.1 kg
incl. switching power supply 90 – 240 V AC
• Operation unit: 13.5 x 18 x 6 cm / 0.7 kg |
|
| |
Temperature controller: |
• Regulation: block
• Temperature range: room temperature up to
+50 °C
• Control accuracy: +/- 0.5 °C
• Temperature difference inside the ICSI dish:
+/- 1 °C
• Sensor: PT, 0.1 % accuracy
• Heatable bath camber: 15 x 5.5 3 cm / 0.22
kg
• Temperature controller: 10.5 x 20.5 x 7 cm /
1 kg |
|
| |
|
Specifications subject to change without notice |
|
|
