CO₂ Incubator C201CO₂-Inkubator C201

CO₂ Incubator Labo C201

CO₂ Incubator Labo C201

REF 15245

Incubator with an inner volume of 200 liters

Advantages of Labo C201:

  • 7“ colour touch screen
  • UV decontamination (option)
  • Particle filter (P3) within airflow
  • Display of measured values for 2 h or 24 h (T, CO2, rH, O2)
  • Cable bushing (Access port)
  • Access control via numerical code (option)
  • RS485 or ethernet interface
  • Active sterile humidity:
  • External water reservoir
    Relative humidity vaporized at 120 °C
    Minimized risk of contamination
    Humidity sensor (rH)
    Very short recovery times
  • CO2 sensor:
  • Dual beam infrared sensor
    Very precise measurement
    Very short recovery times
    Long-term stable
  • Direct heating:
  • Independent over-all heating of inner walls and door
    Homogeneous temperature distribution in the interior
    Very short recovery times
  • Optional:
  • UV decontamination
    O2 control
    Subdivided inner glass door with 6 small doors
    Access control via numerical code
    PC software LaboDat+


InteriorElectro-polished stainless steel with coved corners
Shelves and ductwork easily removable for cleaning purpose
Cable bushing (Access port)
TemperatureIntelligent temperature control system for dry inner chamber
Humidity supplyActive sterile humidity via external water supply container
CO2 controlDual beam infrared sensor
Measurement independent from temperature and humidity
Short recovery timesFor all adjustable parameters through optimized microprocessor control
Easy handlingMenu guided 7“ colour touch display
Display of measured values for 2 h/24 h
Diagnostic systemOptical and acoustic alarm if set point deviation or sensor defect occurs
Door monitoring
Remote alarm
OptionsO2 control: connection for N2 possible
Subdivided inner glass door with 6 small doors
Access control via numerical code
UV decontamination
PC software LaboDat+
InterfacesAlarm contact (potential free)
RS485 or Ethernet interface

ExteriorDimensions 720 x 700 x 870 mm (w x d x h)
InteriorVolume 200 l
Electro-polished stainless steel
Shelves height adjustable
TemperaturePanel heated interior chamber and door
Range 27 °C - 42 °C starting 5 °C above ambient temperature
Stability / uniformity ± 0.1 °C / ± 0.3 °C
Over-temperature alarm 32 °C - 47 °C
CO2 controlDual beam infrared sensor
Range 0 – 10 % CO2
Stability ± 0.1 % CO2
O2 control < 21 % (optional)Measurement with galvanic sensor
Connection of N2
Range 1 % – 21 % O2
HumidityActive sterile humidity supply through vaporizing module operating at 120 °C
Measuring range 0 – 98 % rH / range 60 % – 95 % rH
Access portØ 30 mm
Supply230 V AC, 50/60 Hz or 115 V AC, 50/60 Hz, 250 VA
Inlet pressure for gas 0.8 bar
Ambient temperature 18 °C - 30 °C
ClassificationSafety class I
EN 61010 conform

Subdivided inner glass door - for even better recovery times


Subdivided inner glass door with 6 small doors
Better recovery times of all parameters
Lower gas consumption


UV decontamination


Individual start by user
Duration: 180 minutes
Short-wave UV radiation (UV-C radiation, < 280 nm)
Door opening: UV mode stops immediately


Access control via numerical code on touch screen

Higher security for your cultures

Mechanical unlocking in case of power failure (emergency release)


Our Labo C201 incubators are available with O2-control (O2 < 21 %)

Each of our incubators passes an individual cell test before delivery.
Further accessories of the incubator Labo C201


Gas In-Line-Filter

Accessories for active sterile humidity supply

PC software LaboDat+

To top